|
#!/usr/bin/env python |
|
# |
|
# https://www.dexterindustries.com/GoPiGo/ |
|
# https://github.com/DexterInd/GoPiGo3 |
|
# |
|
# Copyright (c) 2017 Dexter Industries |
|
# Released under the MIT license (http://choosealicense.com/licenses/mit/). |
|
# For more information see https://github.com/DexterInd/GoPiGo3/blob/master/LICENSE.md |
|
# |
|
# This code is an example for controlling the GoPiGo3 Motors |
|
# |
|
# Results: When you run this program, the GoPiGo3 Motors will rotate back and forth. |
|
|
|
from __future__ import print_function # use python 3 syntax but make it compatible with python 2 |
|
from __future__ import division # '' |
|
|
|
import time # import the time library for the sleep function |
|
import gopigo3 # import the GoPiGo3 drivers |
|
|
|
GPG = gopigo3.GoPiGo3() # Create an instance of the GoPiGo3 class. GPG will be the GoPiGo3 object. |
|
|
|
try: |
|
for i in range(0, 101): |
|
GPG.set_motor_power(GPG.MOTOR_LEFT + GPG.MOTOR_RIGHT, i) |
|
time.sleep(0.02) |
|
while True: |
|
for i in range(-100, 51): |
|
GPG.set_motor_power(GPG.MOTOR_LEFT + GPG.MOTOR_RIGHT, -i) |
|
time.sleep(0.02) |
|
|
|
for i in range(-50, 101): |
|
GPG.set_motor_power(GPG.MOTOR_LEFT + GPG.MOTOR_RIGHT, i) |
|
time.sleep(0.02) |
|
|
|
except KeyboardInterrupt: # except the program gets interrupted by Ctrl+C on the keyboard. |
|
GPG.reset_all() # Unconfigure the sensors, disable the motors, and restore the LED to the control of the GoPiGo3 firmware. |